|
“Amongst our customers for high-end
3D CAD Software are all the giants of the
Automobile Industry
in Japan.
These companies have adopted Epiplex500 as the primary
eLearning Authoring tool in order to create and
deliver high
skilled knowledge to train and develop CAD Designers internally.
The companies also use
Epiplex500 for global, company-wide roll
outs of their ERP and SCM applications as well. One
of the world’s
largest auto manufacturers based
out of Japan had begun to roll out CAD software
implementation in late 2004.
They needed a good e-Learning authoring tool
for this software to deliver the advanced skills education
that
was required. The need was urgent, but difficult
to fulfill. It was very hard to capture accurately on such high-
end
CAD software.
In 2005, yet another large global auto company was faced
with the same challenges. Both had tested a bunch
of commercially available authoring tools. After 6 months of rigorous evaluation,
Epiplex500 was chosen as the
winner. They concluded that
Epiplex500 has rich features, more flexible, sustainable
support. An
adaptor was
developed to specifically enhance
the CAD capture.
Since then, Epiplex500 has gained a very good reputation
in the CAD field and has the leadership in Japan
so far.
We
depend upon Epiplex500 to enhance the features and the capture
accuracy so that we can continue to keep
our
dominant position in Japan.”
| |
XueQun Chen |
| |
Cybernet Systems Co. Ltd. |
|
| |
“ The project
has achieved outstanding results with 5000 users
trained online in a
record 6 weeks with 29,000 on-line
hits on all the courses.”
| |
Greg Barsby |
| |
General Manager Operations |
| |
Catalyst Interactive Pty Ltd. |
“The Epiplex500 support team and the product Epiplex500 played a significant role in the achievement of our
project outcomes, and I would like to acknowledge the hard work and dedication of the Epiplex500 team, and
express our appreciation of their efforts. At times over the past two years Epiplex500 staff has worked long
hours to assist the Catalyst Interactive team through the implementation of product customizations and
provision of product support in order to ensure project deliverables met both the demanding deadlines and
high standards required.”
| |
Kate Barsby |
| |
Training Materials Project Lead |
| |
Catalyst Interactive Pty Ltd. |
|
| |
“ Even
though we've seldom needed to contact your Customer Support
department,
they have always
reminded
us that they were there to assist
if needed. The initial training that we
received was sufficient enough to allow
us to create several effective and impressive
training packages. The product upgrades that
we've just observed
would be
welcome enhancements to the system. It has been
a pleasure doing business with Epiplex500.”
| |
Toni Gourdine |
| |
Senior Training Specialist |
| |
Business applications |
| |
New York & Company |
|
| |
“We
see the Epiplex500 suite as the leading technology in its space
with EDX playing a key
role in translating
its benefits to our clients. We think the
proactive work that the Epiplex500
Customer Support (Technical Services)
team do, is unparalleled.
The continued
efforts and support in both product development and pre-sales
is highly
appreciated.
While we continue to accelerate our rate of customer acquisition
and
enjoy our success,
we
acknowledge with deep satisfaction our partnership with Epiplex500.”
| |
S. Gopal |
| |
Founder & CEO |
| |
Exponent Dynamix |
|
“We have been using Epiplex500 at Carnival UK for some months now and it has helped enormously in delivering
quality training and documentation quickly and effectively. It is a simple system to work with and allows a system
specialist to record processes without much up-front training in Epiplex500. We have used Epiplex500 to
create 'snippets' of learning in addition to full processes and these have been well received as a 'just in time' training opportunity.
One major benefit for us is the ability to allow users to
practice in a safe system simulation. In the past it has been
difficult to maintain training environments once a bespoke
system is beyond roll-out.”
| |
Jacqui Page |
| |
IT Training and Development Manager |
| |
Carnival UK |
|
“First
of all, I want to thank your team for its support and patience
during the training.
Following are my key
observations from the
training:
1.
The tool is very simple and easy to use.
2.
All Base files and Meta files are in XML format (File extensions
may be custom to
Epiplex500) from all
editors,
which I think, will make our integration easy.
3.
The visual interfaces in workflow & project design are
very intuitive and the representation
of flow in the
knowledge objects will enable better understanding
of
the process
4.
The output formats in the epiSimdoc-editor are excellent; an
end
user can try the different
modes –
Show,
Guide & Test – to
understand the process. The same
capture can be used for documentation and
also for cue card generation.”
| |
Satyanarayana Raju Indukuri |
| |
Project Lead |
| |
Instancy |
|
“We
are all genuinely impressed by your dedication and responsiveness,
and your support teams are a credit to
your organization.”
| |
Simon Birch |
| |
Advisory and ECM IT |
| |
Deutsche Bank |
| |
|
